Fan wiring
05-31-2010, 09:56 PM
#1
Junior Member
Thread Starter
Join Date: May 2010
Location: Calgary AB
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: I6 HO
Fan wiring
i have me a 91 and i am looking to rip out both of my fans and replace them with two apprx 16" fans to boost my cfm to around 6000 or so.
there is a million threads on this i know...
i just wanna hear from some guys who have done this, how hard are they to mount/wire?
and is it neccesary to remove the pully holding the blade and resize my belt, or would it be wiser to just unbolt the fan?
thanks guys.
there is a million threads on this i know...
i just wanna hear from some guys who have done this, how hard are they to mount/wire?
and is it neccesary to remove the pully holding the blade and resize my belt, or would it be wiser to just unbolt the fan?
thanks guys.
05-31-2010, 10:22 PM
#2
CF Veteran
Join Date: Jan 2010
Location: Indianola IOWA
Posts: 2,059
Likes: 0
Received 1 Like
on
1 Post
Year: 1992
Model: Cherokee
Engine: 4.0
i unbolted the fan and put some different bolts back in to retain pully.
I kept the stock electric fan and threw in a junk yard 16incher. if you wannted 2 after market elec fans i think you can fit 2 stock mech fan shrouds side by side and they will bolt right up. theres pics of mine on the first page of my build page. wirings not to bad
I kept the stock electric fan and threw in a junk yard 16incher. if you wannted 2 after market elec fans i think you can fit 2 stock mech fan shrouds side by side and they will bolt right up. theres pics of mine on the first page of my build page. wirings not to bad
Thread
Thread Starter
Forum
Replies
Last Post
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 03:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)