factory head swaps?
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Sure. Why?
#6
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#7
Newbie
Thread Starter
Join Date: Nov 2010
Location: boonville.In
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 inline 6
Just wondering cause I just bought a 1990 and it don't have the H.O. in it and I've got all the parts for a HO FROM A 1995
Trending Topics
#10
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
You can put that HO into your Renix. Just use your intake and exhaust manifolds along with the intake/exhaust gasket for your Renix. Be sure to use your distributor, valve cover, and flywheel/flexplate from the Renix. I've done this a few times. No big deal.
#12
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#13
Seasoned Member
Join Date: Sep 2009
Location: Coventry, CT
Posts: 273
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0 high output, Alabama Cylinder head, 60mm bored TB
Is it worth all of that work for an extra 13 hp at the most? I'd leave it unless you plan on rebuilding it or putting in a stroker.
#14
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
HO got some, but not all, of it's roughly 10 HP from the head design. Just as much came from the throttle body being 58mm versus 52mm on a Renix and the fact the HO had a better flowing exhaust manifold than Renix.
HO was an excellent marketing scam by Chryco.
#15