Engine Start Problems....
09-02-2012, 02:55 PM
#1
Newbie
Thread Starter
Join Date: Jul 2011
Location: Lansdale, Pa
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 V6
Engine Start Problems....
Recently every time I turn the ignition over, it takes 2 times for it to start. The past two days it literally takes me 6-8 times turning the key while it's in neutral to start it. Someone told me it was a control module issue. I was just wondering if anyone has ever ran into this problem and if I got bum information. Also maybe someone can give me additional information concerning this issue.
I always get good information and tips from this forum, THANKS GUYS!
-Christopher
I always get good information and tips from this forum, THANKS GUYS!
-Christopher
09-02-2012, 05:49 PM
#2
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes
on
17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
The fuel pump should run just a few seconds when you turn the ign on. (no need to crank it). If turning it on, and off a few times first, then hitting it makes it start, probably the check valve in the fuel pump is shot. It's called "the poor man's prime!". Some folx just run like that since changing the pump is the "cure". Worth a try anyway!
Thread
Thread Starter
Forum
Replies
Last Post
Brill
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
27
02-06-2020 12:41 AM
Gtrsrlly
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
08-25-2015 11:50 AM
hkb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-21-2015 05:48 AM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)