Eautoworks Harness issue ??.....
#1
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Masonville, NY
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Eautoworks Harness issue ??.....
Lost both my hi beams on the way to work this morning. I've had the Eautoworks harness for about 3 years, no issues other than the known factory fog light issue. Possible suspects, relay or column switch?
It's -5 now and unfortunately I have to work on it outside. Any info will be appreciated so I keep freezing my *** off to a minimum....
I've read that Honda relays will work as replacements.....
Are the relays dedicated to hi & low or left and right?
It's -5 now and unfortunately I have to work on it outside. Any info will be appreciated so I keep freezing my *** off to a minimum....
I've read that Honda relays will work as replacements.....
Are the relays dedicated to hi & low or left and right?
#2
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,875
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
High and Low.
Common parts store # for relays is 4136.
Common parts store # for relays is 4136.
#3
Seasoned Member
Thread Starter
Join Date: Dec 2010
Location: Masonville, NY
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Got new Pilot relays from Napa ($6-7 ea.), swapped them in and no joy. I "discovered" that I had previously replaced the fuseable link with fuses. Had a blown fuse. Not sure if a relay shorted or the fuse just failed but it's all good now.....
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
erupert66
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-15-2015 02:07 PM
Azzy
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 10:49 PM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-08-2015 06:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)