So my rear upper shock mounts are messed up. I drilled em out but now i need a tap. I dont have a tap. My question is can I drive it to my school which is about 20 miles away (no freeway) with no rear shocks if I take it easy?

 

Watch out for pot holes and speed bumps

 

yeah it will just bounce around alot

 

It will be very bouncy

 

Alright guys I was thinking my ride was terrible after i installed my lift come to find out I was running no shocks lol.

 

yea i drove like 30 miles or so with no rear shocks...and vibes...no worries

 

K cool thanks guys

 

Bouncing just like the car in Uncle Buck

 

xj2010
Mine did the same thing what I did was drill them completey out and go thru the luggage area in the back of the jeep remove the carpeting of course. When you have the 2 holes in side your keep User a drill bit and make the hole a tad bigger then drop some 1 inch grade 8 into the shock mounts. You will probably need a buddy becasue they will want to spin. I caulked the holes back up I did both shocks and took about 25 mins and you will not have to worry about this problem again. I have pics if you need them.

 

Haha, just what I was thinkin'!

 

Try looking into useing your rear sway bar mounts as bar pin eliminators, wish i would have known before mounted my shocks

 

I drilled mine all the way out knocked out the baskets Threw a nut and bolt setup in there and i havn't had a problem since!

 

be very careful

once it starts bouncing from a dip in the road it wont want to stop.

 

Drove it a bit today and let me say whoa is that annoying. I was about to get car sick going over bumps. Im gonna go see what I can do with those rear sway mounts I was reading about that on NAXJA seems like a sweet idea. This is not the first time I have broken bolts up there so I may rig something like 01xj did. I'll post pics when I get it staitened out.

 

So i drilled out the mounts today.put it right thru the floor pan after pulling back the carpet. I also got new hardware (all grade 8) so now I just have to drill out the sway bar peice to 5/8ths then mount em up. Should work well I'll take pics when complete.