hi guys its been a while i haven't had any real problems til just today or haven't noticed before today....anyhow i have to really slam my door to get it to close properly is there any way to fix this or anywhere i can take it to get it fixed for cheap? thanks much for any help you can provide

 

As in, it swings too low?

 

I think so it was dark all the times i had a chance to check it out i couldn't really see what was going on but especially closing it from the inside it really needs a slam to close all the way

 

If it is because the door is sagging, there really is not anything economical that you can do.

 

I've got the same problem. it looks like the top hinge is pulled away from the post. Anyone got any non economical fixes?

 

Big dollars at a body shop.

 

the only fix is welding the metal back together very common prob both mine xjs did it seen plenty in jy welded also

 

Ok so heres what i found today

its not because the doors sagging which is always a good thing, pretty much i just need to find bolts to put in there and it should be good i guess/hope those 2 bolts must have rusted out or something

 

hit the junk yard