door emergency
#1
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
door emergency
so its late and my door is stuck closed.
i pry it open and look at the hinges and then i realize that the hinge is falling apart. the hinge is rusted and falling off the chassis. anybody ever have this problem and would i have to weld the hinge back on?
lower hinge;
upper hinge;
please help
i pry it open and look at the hinges and then i realize that the hinge is falling apart. the hinge is rusted and falling off the chassis. anybody ever have this problem and would i have to weld the hinge back on?
lower hinge;
upper hinge;
please help
#3
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
well i dont personally have a welder or anyone that has one.. do you recommend taking the door off and bringing it down to a shop for a quick weld?
#6
CF Veteran
Join Date: Jun 2011
Location: Southern Idaho
Posts: 1,023
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0 L/242 CID I-6 High Output MFI
Use a floor jack to hold the door up, it's more steady and allows for some adjustment. Tje welding is quote simple, so just make sure that you have a good door seal. It'll annoy the hell put of you on the highway...
#7
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Tempe, AZ
Posts: 692
Likes: 0
Received 1 Like
on
1 Post
Year: 1990
Model: Cherokee
Engine: l6 242
called chrysler and they dont carry any kind of repair kit for my problem.. the door has slid into my fender and wont open more than a few inches.
could loose bolts be to blame? and would jb weld work on the hinges?
could loose bolts be to blame? and would jb weld work on the hinges?
Trending Topics
#8
Senior Member
Join Date: Aug 2010
Location: Arcata California
Posts: 850
Likes: 0
Received 4 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
jb can do some crazy stuff but holding on your door is probly not one of them. go to an autoparts store like car quest and ask the people there for door hinge glue. If they dont know of anything like that then go to a body shop and get a weld laid. shouldnt be more than a hundred bucks to weld all the hinges back on.
#9
Member
Join Date: Dec 2009
Location: South Jersey
Posts: 207
Likes: 0
Received 5 Likes
on
2 Posts
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L I6 Power Tech
Here's some good advice:
https://www.cherokeeforum.com/f2/che...83/#post313520
three posts below that one are some links with more information, including info about the kit mentioned above:
https://www.cherokeeforum.com/f2/che...83/#post313713
https://www.cherokeeforum.com/f2/che...83/#post313520
three posts below that one are some links with more information, including info about the kit mentioned above:
https://www.cherokeeforum.com/f2/che...83/#post313713
Last edited by SNIDELYWHIPLASH; 06-30-2011 at 06:21 PM. Reason: more info
Thread
Thread Starter
Forum
Replies
Last Post
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
03-10-2021 05:52 PM
cmcl3m0r3
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
05-21-2019 02:38 PM
Rambler65
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-29-2015 08:28 AM
Eli Brda
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-27-2015 04:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)