Death rattle??
09-02-2010, 09:26 AM
#1
Newbie
Thread Starter
Join Date: Sep 2010
Location: Cincinnati
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Death rattle??
After putting a 3" bds lift on my Cherokee ever since it has had a terrible rattle in second gear around 2000 rpms and I don't know what's wrong. Any suggestions?
09-02-2010, 10:05 AM
#4
Newbie
Thread Starter
Join Date: Sep 2010
Location: Cincinnati
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
No i haven't put bigger tires on it yet thats next. my friend said something about alighning the drive shaft? is that possible?
Last edited by Tylerknabe; 09-02-2010 at 10:19 AM.
09-02-2010, 11:07 AM
#5
Member
Join Date: Aug 2010
Location: Lubbock, Tx.
Posts: 207
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee
Engine: 4.0L
It's not really "aligning" the driveshaft unless you are adjusting driveline angles. You can, however, get the driveshaft balanced by a driveline shop.
Check for loose u-bolts, springs clamps, shock bolts/nuts, shackle bolts...etc.
Check for loose u-bolts, springs clamps, shock bolts/nuts, shackle bolts...etc.
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
50
12-26-2023 09:09 PM
jeefersjeepers
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-20-2023 12:51 PM
Blue94xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
04-16-2023 10:20 AM
shadowmoses
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-30-2015 01:34 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)