Hey guys I bought a 90 jeep Cherokee with a blown engine i swapped my 91 jeep Cherokee engine into it well today I tried to crank it over the first time. Well I got no start and was no big deal check for fuel is good( checked through the valve) , checked for spark and got no spark I followed cruisers 54 renix tips #1, #4, #5, #7, #18, I bought a new cps and installing it Tomorrow hopefully that's the probelm but if it's not what other thing should I look at

Ps. New to renix jeep

Ohh and only my fuel gauge, water temp and oil pressure gauges work ( they only move when I crank the engine over but the oil and temp gauges peg out when I crank over is that normal I haven't started cat yet only crank)

Also my running light don't work front or rear or interior any tips guys

Ok update guys I installed my new cps and good news I'm getting .5 ac volts like what @cruisers54 tips says but still getting no spark. Is there a way to test the coil or something need help please

Help guys I replaced my coil pack also and still no spark at coil need help please