Crank, no start issue
#1
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Florida
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 5.3 LS
Crank, no start issue
Hey guys I bought a 90 jeep Cherokee with a blown engine i swapped my 91 jeep Cherokee engine into it well today I tried to crank it over the first time. Well I got no start and was no big deal check for fuel is good( checked through the valve) , checked for spark and got no spark I followed cruisers 54 renix tips #1, #4, #5, #7, #18, I bought a new cps and installing it Tomorrow hopefully that's the probelm but if it's not what other thing should I look at
Ps. New to renix jeep
Ps. New to renix jeep
#2
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Florida
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 5.3 LS
Ohh and only my fuel gauge, water temp and oil pressure gauges work ( they only move when I crank the engine over but the oil and temp gauges peg out when I crank over is that normal I haven't started cat yet only crank)
Also my running light don't work front or rear or interior any tips guys
Also my running light don't work front or rear or interior any tips guys
#3
Junior Member
Thread Starter
Join Date: Oct 2015
Location: Florida
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 5.3 LS
Ok update guys I installed my new cps and good news I'm getting .5 ac volts like what @cruisers54 tips says but still getting no spark. Is there a way to test the coil or something need help please
Thread
Thread Starter
Forum
Replies
Last Post
Morris4x4Center
Vendor Showcase
1
12-16-2015 11:05 AM
Morris4x4Center
Vendor Showcase
0
12-15-2015 09:31 AM
xjallseasons
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
12-10-2015 11:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)