I noticed a really bad squeak and pop from my front coils recently,took me a while to figure out what it was,My new coils are the HDs from Rustys so the diameter of the spring is bigger than a stock spring and the small spring keeper at the bottom of the coil was getting in a bind between the coils,So I removed it and no more noise.I know its fine on the street,but what about off road with the sway bar disconnected?Will the coil squirt out if its at full droop?Any suggestions how to secure it?

 

your coil will fall out if there is room! put it back on. just bend the keeper to fit the larger diameter coil

 

ironroc offroad has heavy duty spring keepers. had to use these on mine. they will fall out.

 

Sweet thanks for the info I will check those out!

 

drill hole in front and put nut and bolt in get rid of facvtory crap

 

I like that even better! the fact that you said to put it in the FRONT tells me you know exactly what Im talking about,the factory location wont work at all

 

i rebent mine to fit my rusts 9 inch coils and drilled the hole out im getting the bigger one i forgot all about that

 

 

I just tightened mine down, I also have a 3 inch rustys with the HD coils. I just tightened it down till it bent around the coils, havnt had any issues, But I also havnt been offroad with it yet also.