code p0121
Thread Starter
Member
Joined: Jan 2011
Posts: 142
Likes: 0
From: Duluth, Minnesota
Year: 1996
Model: Cherokee
Engine: 4.0l high output
I popped code p0121 then replaced the tps after the check engine lights went out it started to idle around 12-1500 rpm but only on cold start up and after driving then putting in park. I scanned again and the same code pops but also has apps ckt range. I'm clueless as where to start so any help would be appreciated.
CF Veteran




Joined: Nov 2010
Posts: 5,840
Likes: 117
From: In the middle of Minnesota!
Year: 1999
Model: Cherokee
Engine: 4.0
It is not impossible that you got a bad TPS out of the box.
I'd take it back and try another one. Be sure to clean the connector to the TPS thoroughly with a few sprays of electrical contact cleaner before reattaching. A bit of debris or moisture in the plug can cause gremlins.
And while you are in the area of the throttle body, cleaning of the idle air control and throttle body itself is never a bad idea as they get carboned up over time and miles.
I'd take it back and try another one. Be sure to clean the connector to the TPS thoroughly with a few sprays of electrical contact cleaner before reattaching. A bit of debris or moisture in the plug can cause gremlins.
And while you are in the area of the throttle body, cleaning of the idle air control and throttle body itself is never a bad idea as they get carboned up over time and miles.
Thread
Thread Starter
Forum
Replies
Last Post
4WD4EVER
Modified XJ Cherokee Tech
28
Jul 28, 2023 07:12 PM
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Jul 8, 2023 07:08 AM
dennismo
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
Apr 15, 2018 05:57 PM
tleed
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
Oct 4, 2015 01:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



