mine doesnt have a AC compressor there, it looks as if a previous owner took out the AC cause all my lines are disconnected

 

maybe get lucky and find a comanchee with no ac get that bracket

 

thanks for the info, ill do some checking around at my local JY

 

i think whats going on with mine is the AC has been removed and an extra bracket and "AC Bypass" pully has been installed.....but anyway,m i still need the bracket the "fan pulley" is on

 

found this may give a better idea of the difference in renix and hohttps://www.cherokeeforum.com/f2/byp...ac-pics-23053/

 

all else fails maybe shorter belt eliminate the fan and use another electric???

 

awesome, thats exactley the info i needed, thanks alot.....but now i feel a little stupid, the PO told me the AC just needed to be recharged, i should have noticed there was no compressor....haha

 

as long as it runs good every thing else is just minor **** ...lol...

 

X2 for sure

 

Fixed my wrangler buddy had a bracket laying around with the ac delete pulley on it too! Thank god i did pay a dealer 500 for it

 

Actually quadratech sells just the pulley for $10.

 

its the bearing thats bad on the bracket

 

Mine looks exaxctly the same but it wobbles.

I have a 94 4.0L, 4WD, manual with AC.

On which years is this bracket the same?
It seems like 91-95 because this https://www.cherokeeforum.com/f2/gre...558/#post74407 says this engine was used for those years. Am I correct?
WHatI want to do is search eBay and email junkyards looking for this part and would have more options if I knew which years had the same part.

 

Your correct on the years. I found one in a junkyard. But I had to get one for a newer XJ and use a different AC delete bracket.

 

Clutch Fan Pully Bearing.
I have a 1999 XJ Classic 4.0. the bearing problem.
Can the bearing be replaced?
If so anyone know the size of that bearing?
Also is there a cross reference on the part on the AC Bracket assembly
that could to be interchangeable?