clunking in front
#1
Newbie
Thread Starter
Join Date: Feb 2011
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
clunking in front
i have a 1998 cherokee and it makes a clunking noise in the front whenever i turn sharply and slowly. also there is a rattling when i go over bumps. does anyone have a solution for this problem anything would be great.
#2
Senior Member
Join Date: Mar 2010
Location: Eugene, OR
Posts: 812
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.7 Stroker I6
solution?
replace all worn parts, ie: everything up front.
Is it more of a popping or snapping than clunking?
get new Tie rods since theyre pretty cheap and easy, tighten the track bar.
A clunk going over bumps on mine once was a worn sway bar bushing, also cheap n easy.
other than that, replace everything like I did in my thread, ball joints, hubs, u joints, all tie rods, track bar ect...
replace all worn parts, ie: everything up front.
Is it more of a popping or snapping than clunking?
get new Tie rods since theyre pretty cheap and easy, tighten the track bar.
A clunk going over bumps on mine once was a worn sway bar bushing, also cheap n easy.
other than that, replace everything like I did in my thread, ball joints, hubs, u joints, all tie rods, track bar ect...
#3
CF Veteran
Join Date: Nov 2008
Location: Oak Harbor, WA.
Posts: 6,989
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Get under your Jeeps front end and start wiggling suspension componants. If anything with a bushing moves easily when shakin by hand it is most likely bad. Change just the bad piece if on a budget but, like the guy above said, if one piece is worn they most likely all are if the PO didn't replace anything.
#4
Seasoned Member
Join Date: Jun 2011
Location: Garden Prairie
Posts: 281
Likes: 0
Received 1 Like
on
1 Post
Year: 2000, (1957 Willys)
Model: Cherokee
Engine: 4.0L
Just this morning I found a loose nut on my passenger side motor mount. Made a lot of noise when hitting bumps.
Control arm bushing clank and clunk when worn. Ask me how I know.
Control arm bushing clank and clunk when worn. Ask me how I know.
#5
Senior Member
Join Date: Mar 2010
Location: Eugene, OR
Posts: 812
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.7 Stroker I6
oh yea i forgot motor mounts, mine were actually broken in half.
and yeah I just did my lca's and one of the bushing actually fell out of the arm when I took it out lol.
and yeah I just did my lca's and one of the bushing actually fell out of the arm when I took it out lol.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
MyJeepIsATyrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-04-2015 10:36 AM
studmuffin
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-03-2015 06:59 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)