Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Clicking/Clunking coming from front end

Thread Tools
 
Search this Thread
 
Old 08-07-2010, 05:05 PM
  #1  
Newbie
Thread Starter
 
djhales00's Avatar
 
Join Date: Aug 2010
Location: Davidson, NC
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 242 I-6 4.0L
Default Clicking/Clunking coming from front end

2000 Jeep Cherokee and I have this awful clunking noise noise that sounds like it's coming from mid front end. It sounds near the transfer case when I stick my head out the window to pin point it when i'm driving but who knows. I do not have to be turning, going straight you can hear it as well. Very prominent sound when you coast at 20 mph. Can you give me any ideas on what to look for? my drive shaft is solid, no play up down, side to side. could it be gears?
Old 08-08-2010, 02:24 AM
  #2  
Senior Member
 
lurk520's Avatar
 
Join Date: Apr 2010
Location: Tucson, AZ
Posts: 504
Likes: 0
Received 1 Like on 1 Post
Year: 2002
Model: Grand Cherokee
Engine: 4.0 I6
Default

climb under your jeep and try to rotate your front drive shaft by hand.... mine had play in it and would make a click clack sound... I took out the front drive shaft and eliminated the sound...obviously something is F.ed in my transfer case....
Old 08-08-2010, 02:33 AM
  #3  
Seasoned Member
 
ColoradoXJ88's Avatar
 
Join Date: Sep 2009
Posts: 361
Likes: 0
Received 0 Likes on 0 Posts
Year: 1988
Model: Cherokee
Engine: Rebuilt 4.0L
Default

Sounds like a bad U-joint to me. i had the same sound not too long ago - here's my thread about it, it should help you! BTW, when you check the driveshaft, i would put both the tranny and t-case in neutral and move it all around to check for play.

https://www.cherokeeforum.com/f2/dri...licking-53127/
Old 08-08-2010, 08:14 AM
  #4  
Newbie
Thread Starter
 
djhales00's Avatar
 
Join Date: Aug 2010
Location: Davidson, NC
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 242 I-6 4.0L
Default

Thanks. I'm heading to a "pull a part" place in charlotte to find some misc parts for the jeep and I will check that driveshaft better today.
Old 08-08-2010, 09:10 AM
  #5  
Newbie
 
Hard-y's Avatar
 
Join Date: Aug 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Also if you've been doing any towing might
be the chain in the transfer case they stretch
from time to time
Old 08-08-2010, 01:12 PM
  #6  
CF Veteran
 
no rdplz's Avatar
 
Join Date: Jan 2010
Location: Virginia Beach by way of Michigan
Posts: 5,482
Likes: 0
Received 24 Likes on 24 Posts
Default

front drive shaft u-joints. replace 'em and you should be good.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
investinwaffles
Modified XJ Cherokee Tech
11
05-18-2021 12:02 PM
ahenderl
Modified XJ Cherokee Tech
17
09-12-2015 06:31 PM
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
08-23-2015 07:12 PM
SwankyXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
08-22-2015 09:16 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Clicking/Clunking coming from front end



All times are GMT -5. The time now is 09:47 AM.