Clicking from bell housing when accelerating
#1
Newbie
Thread Starter
Join Date: Feb 2013
Location: Harrisburg area pa
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Clicking from bell housing when accelerating
I've picked up a clicking or ticking noise from the bell housing area of my 98 xj. It is only when accelerating and started off only when acceleration hard and is now pretty much any time you pull out or get in the gas at all... Ideas? I'm stumped
#2
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes
on
17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Automatic? It's never a bad idea to pull the little inspection plate on the front/bottom of your bell-housing by the back of the pan. That gives access to the torque converter to torque plate bolts. If you search "loose torque converter bolts" you will see they have a habit of loosening up and causing, normally a knock. Just a thought! Good luck.
There is at least one good deal on that there in the writeup section.
There is at least one good deal on that there in the writeup section.
#4
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes
on
17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
I went ahead and found it>> https://www.cherokeeforum.com/f51/ho...ocking-125547/
Something to check anyway, rule out.
Something to check anyway, rule out.
Thread
Thread Starter
Forum
Replies
Last Post
jpmarine6786
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
43
10-22-2023 04:16 AM
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-08-2023 07:08 AM
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
53
04-30-2021 02:35 PM
Cherokee_of_Tennessee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-30-2015 12:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)