Today I was removing the yoke to change out my leaky rear pinion seal. Well I pulled it off, but the washer sitting inside it decided to go for a new land speed record and I haven't been able to find it since. Does anyone know the outside diameter, inside diameter, and thickness? I searched high and low online but haven't been able to find any info. Thanks in advance.

 

Take your battery powered impact to the junk yard.....

 

I think the part number for what you are asking about is 2070117.
Unfortunately no specs are listed in my parts catalogs, just says washer, and can't seem to find
anything online either. Looks like they can still be had though.

https://www.moparpartsgiant.com/part...e~2070117.html

Assuming it is what you are asking about.

 

I don't own a battery powered impact and the junkyard is over an hour away. Trying to not make that trip if I don't have to. Especially since I would have to borrow somebody else's vehicle.

That's the part I'm talking about Ralph! Thank you for the part number... I'll do more digging today and see if I can come up with anything. If not, I'll probably have to order online.

 

Got a Jeep Dealership near you?
Chances are it is not in stock but if you order early enough in the day probably only a day out.
And don't automatically assume your Dealership is going to rape you on the price.
They might but.......
Also don't forget that many of the online Mopar retailers charge shipping so......

EDIT: Go read this:

https://www.cherokeeforum.com/f2/research-249236/

So you can find your own damn part numbers.
Just kidding. LOL.

 

There is a dealership slightly under half an hour away. I gave them a call and they said they would get back to me later if they could get their hands on one.

That's an incredible resource, thank you. Just downloaded all of them just in case the site ever goes down.

 

Dealer never called me back but I ended up finding the washer! Took an hour of looking though. Worth it I guess?

Dimensions:
4cm outside diameter
2.25cm inside diameter
0.5cm thickness

This part is for a 1998 Jeep Cherokee Classic, AW4, NP242, Chrysler 8.25 rear axle. Hopefully this helps somebody in the future.