CB Radio Power
Thread Starter
Seasoned Member
Joined: May 2010
Posts: 254
Likes: 0
From: Fort Dix, NJ
Year: 1998
Model: Cherokee
Engine: 4.0
Okay, I have searched through the threads and even done a couple of different searches using the search function. I just can't seem to find anything on where everyone is running their power from for their CB radios. Does anyone have any ideas and as always, pics would be nice as well.
Thanks for any and all help and advice.
Thanks for any and all help and advice.
Junior Member
Joined: Oct 2010
Posts: 39
Likes: 0
From: indiana
Year: 1999
Model: Cherokee
Engine: 4.0
I need to install a cb and I plan on installing a 6 fuse block under the dash coming off of the battery it will have power at all time so will have to be sure to shut cb off. You might try that
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
ON THE FUSE BOX YOU SHOULD HAVE A COUPLE OF EMpty slots using a test light turn the key to accesorie and test them when you find a hot one turn the key off to make sure power goe away attach hot wire with in line fuse to that
Thread Starter
Seasoned Member
Joined: May 2010
Posts: 254
Likes: 0
From: Fort Dix, NJ
Year: 1998
Model: Cherokee
Engine: 4.0
Thank you for the replies. I was wondering if there is a better place to get power from inside. If not, where is the best place to run the wires through into the engine compartment area to the fuse block?
Thanks again
Thanks again
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
i think you have a fuse box on the passenger side kick panel near the floor
Last edited by freegdr; Dec 11, 2010 at 09:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 7, 2015 11:29 PM
vegasXJ-Davey
Modified XJ Cherokee Tech
0
Sep 7, 2015 09:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




