cat back gasket
#1
Junior Member
Thread Starter
Join Date: Mar 2014
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
cat back gasket
Hey all, hopefully a quick amd easy question. Where my exhaust manifold meets up to the cat is rusted all to crap. Ive got a new gasket, but cant get the 2 remaining bolts out. Gonna try some heat, my question is, does anyone know what size the bolts are in case i cant keep one in tact to go to the hadware store for new ones? Thats it. Thanks guys and gals
#2
Seasoned Member
Join Date: Jul 2012
Location: New Milford, CT
Posts: 484
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Those bolts are normally rusted into place and damn near impossible to remove. They're not just regular bolts either. They're those barbed bolts.
If I were you I'd just cut them both out, drill both the holes out to 3/8" and bolt them back together with regular 3/8" bolts.
If I were you I'd just cut them both out, drill both the holes out to 3/8" and bolt them back together with regular 3/8" bolts.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-23-2015 06:27 PM
Doogluus88
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-01-2015 06:11 AM
Bluelight
Other Vehicles. Other Jeep models & cars and trucks of other makes
2
09-01-2015 12:11 AM
Blazeorange
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-26-2015 11:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)