Cant get my transmission oil pan off!
#1
Member
Thread Starter
Join Date: Apr 2010
Location: Galveston TX
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0 i6
Cant get my transmission oil pan off!
Im trying to replace my transmission filter, i got all the bolts off of the pan and now the gasket has fried the pan to the transmission. Any tricks to get the damn thing off?
#2
CF Veteran
Join Date: Nov 2009
Location: The Republic of TEXAS
Posts: 8,172
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1998
Model: Cherokee
Engine: 4.0L HO
Is it the pan gasket or the dipstick tube o-ring that's keeping it from dropping? Pan gasket was a non-issue on our '98 but the dipstick tube.......here's what we ended up doing......small tubing cutter and piece of 1/2" rubber fuel hose. It will be a non-issue from this point on. Maybe a putty knife on the pan gasket? Careful - don't bend the gasket surface on the pan or scratch it on the tranny case.
Last edited by djb383; 09-04-2010 at 01:37 PM.
#3
CF Veteran
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
If its just the gasket hanging it up try smacking the side of the pan with a dead blow hammer or a rubber mallet. Unless someones glued it on with something super sticky that should free it up.
Thread
Thread Starter
Forum
Replies
Last Post
scoutmstr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
04-06-2016 11:14 AM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
09-13-2015 06:06 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-13-2015 02:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)