Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Can this be removed?

Thread Tools
 
Search this Thread
 
Old 10-20-2014, 05:20 PM
  #1  
Newbie
Thread Starter
 
amonideos's Avatar
 
Join Date: Feb 2014
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default Can this be removed?

Hey everybody! I've been lurking here for a while and finally have enough to buy my own XJ! I went to look at this XJ yesterday and it needs some work, but I like it!

The main question is can I remove the black side trim on the lower part of the doors to make it all white or will there be holes from where the plastic was mounted?

Here's a link to the CL ad.

http://sacramento.craigslist.org/cto/4710730315.html
Old 10-20-2014, 05:24 PM
  #2  
Banned
 
93_xjcherokee's Avatar
 
Join Date: Oct 2014
Location: tucson
Posts: 17
Likes: 0
Received 9 Likes on 9 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
Default

Ad says fenders were re painted. Check for subframe damage In front before you buy it
Old 10-20-2014, 06:03 PM
  #3  
Newbie
Thread Starter
 
amonideos's Avatar
 
Join Date: Feb 2014
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Originally Posted by 93_xjcherokee
Ad says fenders were re painted. Check for subframe damage In front before you buy it
Thanks for the heads up! I looked all over the place and I didn't see any frame cracks or rust or anything. I think this one needs a new TPS though. When I drove it I pushed the accelerator all the way to the floor and the RPM's wouldn't get past 2k which is incredibly unnormal also it had minimal acceleration and I didn't think I would make it up the hill. The engine sounded and looked great, but I am worried about the tranny.

Do you think that this is a tranny problem or a simple TPS?
Old 10-20-2014, 09:11 PM
  #4  
CF Veteran
 
BlueRidgeMark's Avatar
 
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 952 Likes on 767 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by amonideos

Do you think that this is a tranny problem or a simple TPS?

Yes.

Or something else. Nobody can tell you over the Internet. All we can do is tell you a list of things it might be.


One thing is certain - you should not be paying anywhere NEAR top dollar for this vehicle. You are buying a project which may need anything from a few tweaks to a full trans replacement.

By the way, frame damage is not always obvious to the naked eye. How does it track? Does it feel like it needs an alignment? Is the steering wheel centered when you are going straight?


Unless you get this thing really, really cheap, and you are ready to drop some coin and time on major repairs, I suggest you walk away.
Old 10-20-2014, 10:35 PM
  #5  
CF Veteran
 
Turbo X_J's Avatar
 
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes on 16 Posts
Year: My Jeep is a GMC
Default

Pay a mechanic $100 to look it over for you. If no major issues since that ad has been up over a week offer $600. For future reference, "good" priced vehicles on CL sell within minutes.
Old 10-21-2014, 07:50 AM
  #6  
CF Veteran
 
andrewmp6's Avatar
 
Join Date: Jun 2011
Location: Louisville,KY
Posts: 8,014
Likes: 0
Received 14 Likes on 14 Posts
Model: Cherokee
Default

I believe the black trim is just glued on it.And they are right the front fenders have been painted they are missing the pin strip that's down the sides.To me that screams its been wrecked in the front before.
Old 10-21-2014, 08:21 AM
  #7  
Member
 
Mountaindog's Avatar
 
Join Date: Oct 2014
Location: Alberta
Posts: 112
Likes: 0
Received 0 Likes on 0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L
Default

not sure about the pre 97 but 97 and up you can just remove the door trims. Its just an adhesive trim tape holding them to Jeep so no holes to fill.

Youl be left with some residue from the tape... you can buy a rubber trim eraser that hooks on yur drill or you can hand bomb it off with soapy water or goo-gone.

Doesnt take long really, and it helps if the Jeep is wet, i used a spray bottle with soapy water and a non marking plastic tool.


Old 10-21-2014, 08:24 AM
  #8  
CF Veteran
 
Roler's Avatar
 
Join Date: Jan 2012
Location: Australia
Posts: 3,096
Received 300 Likes on 249 Posts
Year: 1997 (RHD)
Model: Cherokee (XJ)
Engine: 4.0 ltr
Default

An ad that describes the vehicle so differently from what you on a test drive alone already found to be the case...Sounds like more 'hidden treasures' down the road. You "finally saved enough money" to buy an XJ. Keep it for now, and look somewhere else.
Old 10-21-2014, 10:48 AM
  #9  
Newbie
Thread Starter
 
amonideos's Avatar
 
Join Date: Feb 2014
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Thank you everyone who gave me their advice! I think I'm going to pass on this jeep unless the seller will sell it extremely cheap. Also the door trim answer is helpful! Now I don't feel so bad buying one with it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
01-31-2024 04:58 PM
scatgo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
03-22-2021 09:56 AM
ZJBeachRunnerGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
18
03-10-2021 05:52 PM
Rodney Knutson
Cherokee Chat
3
09-26-2015 09:58 PM
Juan2387
Modified XJ Cherokee Tech
0
09-25-2015 01:44 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Can this be removed?



All times are GMT -5. The time now is 10:18 AM.