camPS, crankPS, common sensor ground splice?
03-12-2013, 03:48 PM
#1
Seasoned Member
Thread Starter
Join Date: Dec 2010
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
camPS, crankPS, common sensor ground splice?
2000 xj with 175,000 Miles
I am having an issue with my camPS, crankPS recieving 5V at both the power and ground connector pins.
Is there a common ground or splice for ground somewhere in the harness?
I need to check this before I go ahead and buy a PCM.
I am having an issue with my camPS, crankPS recieving 5V at both the power and ground connector pins.
Is there a common ground or splice for ground somewhere in the harness?
I need to check this before I go ahead and buy a PCM.
03-12-2013, 08:23 PM
#3
CF Veteran
Join Date: Aug 2011
Location: Nor-Cal Coast
Posts: 10,489
Likes: 0
Received 17 Likes
on
17 Posts
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
On my 90 some sensors ground at the Puter' and TCU, which then ground on a stud at my dipstick...it I have that right. Allot grounds there.
03-12-2013, 09:48 PM
#4
Seasoned Member
Thread Starter
Join Date: Dec 2010
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
CCKen thanks for that!
fyi for anyone in the future
The splice for the crank/cam/injector etc ground was on the firewall in the smaller loom, right before where the injectors branch off
Still did no help for me though
fyi for anyone in the future
The splice for the crank/cam/injector etc ground was on the firewall in the smaller loom, right before where the injectors branch off
Still did no help for me though
Thread
Thread Starter
Forum
Replies
Last Post
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
45
06-29-2022 05:51 PM
dock2778
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-08-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)