Jeep Cherokee Forum

Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Cam position sensor wave form

   
Old Dec 5, 2019 | 06:13 AM
Share
  #46  
Dave51's Avatar
Dave51
CF Veteran
5 Year Member
Liked
 
Joined: Jan 2017
Posts: 3,438
Likes: 417
From: Connecticut
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default
Originally Posted by 4x4jeepmanthing
I just add the 20:1 to a channel + one of the probes it came with?
Before you do that, confirm that you are using the attenuator probe on the coil. You should be able to read 350V with what you have.
Reply
0
Old Dec 5, 2019 | 10:15 AM
Share
  #47  
4x4jeepmanthing's Avatar
4x4jeepmanthing
Thread Starter
CF Veteran
 
Joined: Jun 2016
Posts: 1,011
Likes: 20
From: CO
Year: 99
Model: Cherokee (XJ)
Engine: 4.0
Default
6022be came with two of these.

https://www.ebay.com/i/113330462861?...RoC_3kQAvD_BwE
Reply
0
Old Dec 5, 2019 | 10:45 AM
Share
  #48  
Dave51's Avatar
Dave51
CF Veteran
5 Year Member
Liked
 
Joined: Jan 2017
Posts: 3,438
Likes: 417
From: Connecticut
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default
Originally Posted by 4x4jeepmanthing
Is there a little switch on the side of at least one of them?


Reply
0
Old Dec 5, 2019 | 11:25 AM
Share
  #49  
Dave51's Avatar
Dave51
CF Veteran
5 Year Member
Liked
 
Joined: Jan 2017
Posts: 3,438
Likes: 417
From: Connecticut
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default
It looks like all of that series of Hantek probes have attenuating capability, and as long as it's on x10 you're attenuating (I thought 6022 only had one 10:1 capable probe ).
Reply
0
Old Dec 5, 2019 | 02:57 PM
Share
  #50  
4x4jeepmanthing's Avatar
4x4jeepmanthing
Thread Starter
CF Veteran
 
Joined: Jun 2016
Posts: 1,011
Likes: 20
From: CO
Year: 99
Model: Cherokee (XJ)
Engine: 4.0
Default
Originally Posted by Dave51
Is there a little switch on the side of at least one of them?

yes both have the x1-x10 switch
Reply
0
Old Dec 5, 2019 | 03:00 PM
Share
  #51  
Dave51's Avatar
Dave51
CF Veteran
5 Year Member
Liked
 
Joined: Jan 2017
Posts: 3,438
Likes: 417
From: Connecticut
Year: 2000
Model: Cherokee (XJ)
Engine: 4.0
Default
Have you been using the x10 setting?
Reply
0
Old Dec 5, 2019 | 03:02 PM
Share
  #52  
4x4jeepmanthing's Avatar
4x4jeepmanthing
Thread Starter
CF Veteran
 
Joined: Jun 2016
Posts: 1,011
Likes: 20
From: CO
Year: 99
Model: Cherokee (XJ)
Engine: 4.0
Default
Originally Posted by Dave51
Have you been using the x10 setting?
I've tried both on the cam signal, I believe I had it on 10x for the coil wire but ide have to look.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
1995 cherokee 2.5 no pulse
papawhellie
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Jun 20, 2019 09:25 PM
Motor rebuilt, then coil pack failure... hmmm
Moncheche
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Jun 2, 2015 08:43 PM
1999 Cranks but no start
dernt
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Dec 14, 2014 09:29 AM
some cam and crank sensor questions
96ckeecntry
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Apr 20, 2013 08:09 PM
Issues with crank signal
RAH
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
Sep 1, 2010 01:22 AM
Back to Subforum
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
View Next Unread
Heater Door Replacement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:11 PM.