Hello, newbie from NE, it's getting hot over here and my a/c won't work.
I found a great write-up here about a/c and heat system, went through
the whole trouble shooting; replaced low pressure cutout swith, temp sending unit, relay, fuse, even replaced the whole ac line(was busted by the fan blades when my jeep was doing DW).

When I unplug temp sending unit, aux fan comes on, jumper low pressure switch, THEN aux fan AND a/c clutch comes on too.
Still NOT WORKING!!!

Only thing I'm waiting is high pressure cutout switch that I ordered.
Freon charged too. WHAT CAN BE WRONG???
NEED HELP!! It's getting really hot here. lol.

ps. as working on the problem, I wasn't sure about few things.
1. when replacing a/c line, is there anything you need to take off from
the new one except those plastic caps at each end?

2. Is low pressure cutout switch same thing as ac clutch cycling switch?

3. Finally, where is the hi pressure switch? I can not find one on my 99 xj classic. (any pics??)

Thanks for reading, any comments welcome.