A/C controls
I have a 1988 cherokee and eveything works with the A/C but the selector on the dash. the ac blows cold air but it will not blow out the vents. it will only blow out the defrost. Can anyone help with this problem?
CF Veteran
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
behind the front bumper pass side there is a vacuum storage ball/canister with two lines on tit trace both lines for broken/cracked places most common spot is beside the battery
Member
Joined: Jul 2011
Posts: 199
Likes: 1
From: Atlanta / Florida
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L
Something's up with the vacuum lines. Unsure how they're routed on an '88, but definitely start tracing them to see if something came unplugged.
On my '00, I had to cycle through the controls a few times with the car running (to pull the vacuum) to get it to work properly after I put the dash back together. On mine there is an additional vacuum line that reaches through the firewall between the A/C lines and heater core lines that fits into a "T". I've seen quite a few forget about that one.
On my '00, I had to cycle through the controls a few times with the car running (to pull the vacuum) to get it to work properly after I put the dash back together. On mine there is an additional vacuum line that reaches through the firewall between the A/C lines and heater core lines that fits into a "T". I've seen quite a few forget about that one.
Just dealt with this same issue in my 97. In mine I had a break in the vacuum line from resting on the heater hoses where it went in the firewall. After repairing that I had vacuum back to the controls but it still wasn't working. I took the controls apart and found that the vacuum holes in that little plastic circle piece in the back of the control switch were clogged and taking it out and cleaning them out with a pin solved it.
i just had the same problem. the line running to the ball canister behind the bumper was broke. it broke off flush with the rubber elbow that connects to the canister but was still sitting in line with the elbow. when i touched it moved and i could hear the vacuum. i pulled the broken piece from the elbow with a small pair of needle nose pliers. then i pushed the line into the elbow. everything works now. thanks for pointing this out.
Thread
Thread Starter
Forum
Replies
Last Post
bradleyheathhays
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Oct 21, 2024 09:27 AM
sluger17
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Jul 8, 2023 07:08 AM
jeepdewd
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
20
Aug 2, 2016 01:29 AM
studmuffin
Cherokee Chat
8
Oct 5, 2015 01:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



