Sasq40

long story short i but a hole through the little breather valve that goes from the valve cover to the air filter. ive looked around town and cant find a replacement! A buddy of mine is talking about some kind of mini kn filter you can buy to go in there, any ideas? im trying to find something to use in there so i can get the jeep on the road!

rich

Not sure on the begining of your story but I think the parts your talking about are two 90 degree elbows ,4 short pieces of rubber tubes, and two small pvc pipes that is for both the front and rear holes on top of the valve cover and you can get them all at the dealers for under 15 bucks.g/l

Sasq40

K I'll go check. And yeah I broke the front 90 valve

jeepn_83

if you got to the parts store yes they have little breathers that'll just pop on there no probs i had one i my last jeep for years

Steph74

not sure what year or engine you have.
I just replaced mine (renix 89). It was the tubing that goes from the front of the valve cover to the air filter going through a connector .... it is the CCV at least on the older engines
O'reilly have a front vacuum harness replacement for less than $20. In and out ....easy replacement

BeaglesXJ

i think a trip to the jy is in order if you want it cheap

Johndoe

I had the same problem and am from the same city our jy sucks there is nothin there for our jeeps the guy doesn't deal with anything older than 2000 and he rapes in price. But the breather thinger fixed mine.

No4x4Yet

Either a junkyard or plastic weld it. The crank case ventilation isnt the most important thing to be perfect on the engine.

Sasq40

Found one at the dealership. 10$$ but I like using the right stuff so o well

No4x4Yet

Cant really go wrong fro ten bucks

1991Jeep_Man

Call me an idiot, but when you guys say the dealership, are you actually walking into any Jeep dealership and aksing for the part? I need a new one of these, and Im at a loss lol.

tuxfan212

I just cut mine at both tips and ran a hose. Worked like a charm.