Brake proportioning valve question
12-15-2010, 12:24 PM
#1
Newbie
Thread Starter
Join Date: Dec 2010
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Brake proportioning valve question
Hey ppl,
I have a 95 that was originally equipped with ABS. I have since disabled the ABS along with swapping in different non-ABS axles in. I now want to remove that huge ABS unit but have a problem. I noticed that the stock proportioning valve only has 2 output ports that feed the ABS which has 3 output ports (2 for front, 1 for rear).
What replacement valve can I use that will have the 3 ports needed?
Thanks.
I have a 95 that was originally equipped with ABS. I have since disabled the ABS along with swapping in different non-ABS axles in. I now want to remove that huge ABS unit but have a problem. I noticed that the stock proportioning valve only has 2 output ports that feed the ABS which has 3 output ports (2 for front, 1 for rear).
What replacement valve can I use that will have the 3 ports needed?
Thanks.
12-15-2010, 10:50 PM
#3
Senior Member
Join Date: Mar 2010
Location: Southern California
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
I did the same thing, ripped out that terrible ABS, went to the junkyard and got everything from another XJ w/out ABS... easiest way to go.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Montana5991
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-02-2015 09:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)