Brake Pedal Switch Won't Stay Inserted Right
Thread Starter
Seasoned Member
Joined: Jul 2013
Posts: 426
Likes: 10
From: Groveland, CA
Year: 1996 Two Door Wagoneer
Model: Cherokee
Engine: 4.0L
Brake Pedal Switch Won't Stay Inserted Right
So the brake pedal switch keeps pushing back when the pedal lever rests against the switch button. This has been creating some TC unlock issues.
I push the switch in and the TC problem goes a way. But not for long. The pedal keeps pushing the switch back out of its socket.
So I pushed the switch in and used a zip tie around the switch block and through the adjacent whole in the bracket. Holds the switch in place just fine. But...
Will this possibly make the pedal not return sufficiently? What bad does that make?
How do I know the right position of the switch?
I push the switch in and the TC problem goes a way. But not for long. The pedal keeps pushing the switch back out of its socket.
So I pushed the switch in and used a zip tie around the switch block and through the adjacent whole in the bracket. Holds the switch in place just fine. But...
Will this possibly make the pedal not return sufficiently? What bad does that make?
How do I know the right position of the switch?
Thread
Thread Starter
Forum
Replies
Last Post
n1ck_11
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Jun 8, 2018 11:36 AM
91_XJ_Dude
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
May 14, 2014 08:36 PM
FleXJ01
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Nov 11, 2011 01:37 PM
PEPPERHEAD
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Oct 23, 2010 06:42 PM
calmain13
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
Jan 5, 2009 11:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)