I was installing my lift yesterday and all 4 of my upper rear shock bolts broke off. Any ideas on how we can get them out today?

 

You can pull up the carpet in back and cut a hole in the floor. There is a writeup on here somewhere. I'll try and find the link.
here is one way:
http://www.jeepforum.com/forum/f11/s...-heavy-323809/

 

Do what I did... use an air hammer and knock those stupid nuts out then fish in some real bolts with lock washer.

bolt them in and done. no holes to cut, no headaches later.


EDIT: Yeah like the OP in the link...

 

drill into the bolt then use an extractor:

 

We broke 2 of these. We ended up using an air hammer like stated above and had them out in 5 minutes

 

the only thing worse then breaking a bolt is breaking off a screw extractor or drill bit trying to get it out...

 

It was terrible!

 

i had to fabricate brackets for the same reason... look at rear shock mounts .... they Are holding amazing... ive had them on 3 weeks now

 

Air hammer hands down. Than get some bar pin eliminators.

 

Don't know if you have it in your area... but Harbor Freight sells left handed drill bits that work wonderful for removal of broken bolts. But then again so does the air hammer.... plus it's more fun at times.

 

Real good threads on here use the search option that way you can keep going back to the thread with qeustions.gl