blocks or shackels?
Thread Starter
Seasoned Member
Joined: Feb 2010
Posts: 359
Likes: 0
From: michigan
Year: 2001
Model: Cherokee
Engine: 4.0 lt 6cyl
i am getting ready to add a 4.5 inch rustys lift and wanted to add another inch so i can fit 33s with out trimming so my question is if i should use blocks or shackels. this is mostly a DD and it is a 2001 sport! thanks oh and any input on the rustys lift is nice too!!!
CF Veteran
Joined: Jul 2009
Posts: 1,839
Likes: 7
From: West Deptford, NJ
Year: 97
Model: Cherokee
Engine: 4.0
Thread Starter
Seasoned Member
Joined: Feb 2010
Posts: 359
Likes: 0
From: michigan
Year: 2001
Model: Cherokee
Engine: 4.0 lt 6cyl
oh and another question.....rough country or rusty's? there around the same price but what is better? i was gonna get one of these 2 because they have full 4.5 inch leaf packs and not drop shackles so that way i could add a 1 inch block or shackle to get a bit more height
Trending Topics
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
i have not looked at either one, however you want one with bracing on it. Also, i have heard that chevy lowering shackles are a good lift shackle as well. Several have run them on here.
I personally use Tera-Flex.. 1/4" steel with bracing and zerk fittings.
I personally use Tera-Flex.. 1/4" steel with bracing and zerk fittings.
Member
Joined: Jun 2009
Posts: 177
Likes: 0
From: Florida
Year: 1992
Model: Cherokee
Engine: 4.0 Power-Tech 242 I6
My opinion would be to go with the RC lift that's what i'm currently running and i love it, another plus is they have great customer service. Rusty's on the other hand their shipping is pricey and i'm not a fan of their customer service, when my friend ordered shackles for his CJ from them they kept sendin him in circles about where his stuff actually was it took them well over a month almost 2 to actually get his stuff.
Member
Joined: Jun 2009
Posts: 177
Likes: 0
From: Florida
Year: 1992
Model: Cherokee
Engine: 4.0 Power-Tech 242 I6
Honorary Moderator
Joined: Mar 2010
Posts: 8,135
Likes: 16
From: Gilbert AZ/Las Cruces NM
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
They make them specifically for the XJ. I got them from a jeep only JY for $45 for the spacers and shackles i will get you a link!
here:
http://www.quadratec.com/products/16191_703.htm
you can probably find them cheaper tho Quadratec is a bit pricy in my opinion
here:
http://www.quadratec.com/products/16191_703.htm
you can probably find them cheaper tho Quadratec is a bit pricy in my opinion


