98CherokeeLimit4x4

Would it be a good idea to herculiner my quarter panels and rockers?

mike albo

yeah,everybody on here is doing it

raypla

The prep work is the key and the majority of the time spent. I did U-Pol Raptor sprayed on, comes as a kit w/the gun for ~$100 sprayed on at 45 psi

I sprayed w/the doors closed and was very happied w/the coverage

98CherokeeLimit4x4

any quarter panel pictures?

mark's91-XJ

i did it the easy way , went to wallmart and bought their bed liner 1 gal.
taped it off ,sanded the clear off and rolled it on, done.
note : i filtered the can with a screen(door screen) because i wanted
a even sand finish.

heep92

i just recently did mine they aren't that great ive still got to do some touch ups but i like the look of it



Send To Phone
Send To Phone

98CherokeeLimit4x4

Yea I've took 2 years of autobody should be easy for me...I hope I don't If I'll do it though Might just do floorboards jeep being white and gold

98CherokeeLimit4x4

What did you use to trim your fenders there clean lookin

DCM

What is the point of bedlining quarterpanels? to get mud off easier? i know rockers are to prevent rust...

heep92

thanks
the front just a die grinder if i remember right lol it was awhile ago

and the rear just some tin snips doing the cut and fold trick there not that clean up close trust me lol

98CherokeeLimit4x4

Quarter panels rust too up north bad espicially on cars

heep92

i did mine becuz after i cut and folded the rear the paint chipped off at the fold and the paint i used at first like disapeared and it started to rust so i cleaned it all up and figured wat the heck since i had a ton of bedliner anyways haha

Keaton

Mine are the same haha look good in pics but theyre not nearly that good lookin up close.