Basic Tansfer Case Question
#1
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Marshall, WI
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0L i6
Basic Tansfer Case Question
If I had an NP231J should it mount up to any jeep transmission? What I mean is if I pulled the TC out of my 94 Cherokee 5 Speed Man and tried to install it into my 94 Cherokee Automatic, would it just bolt up or are the output shafts on both trannys different? dont need to get crazy in depth with this, just need to know if it will or will not work and a basic why. thanks!
#2
CF Veteran
I think your only issue might be the spline count.
Seems I read someplace they're different sized shafts/spline count.
One reason I didn't pull the xfer case from my parts XJ since it was
automatic and mines a AX-15
Seems I read someplace they're different sized shafts/spline count.
One reason I didn't pull the xfer case from my parts XJ since it was
automatic and mines a AX-15
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
2heapjeeps
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
13
10-04-2015 10:52 PM
shotseven
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 03:06 PM
CherokeeHoonigan
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
4
09-04-2015 12:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)