B1S2 NTK Sensor Failure After 3 Weeks - What's the Chance?
07-20-2019, 03:50 PM
#1
CF Veteran
Thread Starter
B1S2 NTK Sensor Failure After 3 Weeks - What's the Chance?
The answer, of course, is "none".
Wiring harness connector going into the oxygen sensor connector:
giving signal
CH1 = B1S1
CH2 = B1S2
CH3 = B2S1
CH4 = B2S2
Wiring harness connector going into the oxygen sensor connector:
giving signal
CH1 = B1S1
CH2 = B1S2
CH3 = B2S1
CH4 = B2S2
Last edited by Dave51; 07-20-2019 at 03:53 PM.
The following users liked this post:
OldTires (07-23-2019)
07-20-2019, 03:53 PM
#2
CF Veteran
Thread Starter
BTW this was covered by the wire loom, so beware! Wire loom plastic doesn't make the harness bulletproof!
The following users liked this post:
PatHenry (07-22-2019)
The following users liked this post:
Dave51 (07-23-2019)
Thread
Thread Starter
Forum
Replies
Last Post
frankjc
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
10-16-2017 08:09 AM
Doogluus88
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
06-30-2015 06:05 PM
vr4operator
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-16-2013 09:06 AM
TN12valve
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-17-2012 08:44 PM
FleXJ01
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
10-27-2011 06:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)