Axle U bolts
03-25-2010, 04:37 AM
#2
Junior Member
Join Date: Jul 2009
Location: Colton, OR
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L I6
pretty much any autoparts store, i found a cheap set that were sold as a lowering kit at schucks/o reilley. i know u can order some from car-quest as well. just measure the diameter of the rod, the axle diameter, and length you need.
03-25-2010, 06:06 AM
#3
Senior Member
Join Date: Oct 2009
Location: Sutton, New Hampshire
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L
Alternatively, if there are any spring shops near you, you can go there as well and I'd recommend them over a place like Autozone or NAPA. The materials they use to custom-cut springs and u-bolts are generally meant for semi's and other large trucks...and if it's tough enough for them, it's tough enough for your Jeep.
*edit*
When I ordered my RC kit, I was sent the wrong u-bolts and had to get more. I went in with the length I needed, thickness, and radius of the curve, and they had a full set bent up for me in about 5 minutes. Cost: $30. Not too bad.
*edit*
When I ordered my RC kit, I was sent the wrong u-bolts and had to get more. I went in with the length I needed, thickness, and radius of the curve, and they had a full set bent up for me in about 5 minutes. Cost: $30. Not too bad.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
hogluvr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-16-2015 08:15 AM
cerami50
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-14-2015 10:28 PM
eagle11401
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-10-2015 09:06 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
09-05-2015 07:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)