can I swap a front axle from a 95 xj to a 90 xj? my 90 has the two piece shaft on the passenger side. will I have any problems going to a solid axle or do I need to doo something to the transfer case also?
Thanks

 

I believe you can, but I hope some one with more back round can help you.

 

direct fit no problems been there done that

 

t case will be fine just delete the cable and plug the vacuum line for the disconnect

 

Make sure they're the same ratio though.

 

are you talking just the axle shafts, or the whole axle/diff?

because you can just swap the passenger side axle shaft, you just have to add a seal in the the diff and remove the smaller one in the tube. then simply make a block off plate for the hole when you remove the vac motor.

and yeah, just plug the vac line at the t-case.

or you can simply swap out the whole diff with no other mods other than the vac line.