Another pitman arm removal thread?
#16
Member
Thread Starter
Join Date: Feb 2018
Location: Toledo
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee(XJ)
Engine: 4.0
185ft/lbs is the spec, if you got it that tight chances are it's where it needs to be. Did you bleed air after installing the box? Jack the front tires off the ground, turn steering wheel lock to lock about 20 times. Helps if you have a helper turn the wheel so you can make sure the reservoir doesn't run dry. If the fluid bubbles up, shut it down for a bit and let it settle
#18
Member
Thread Starter
Join Date: Feb 2018
Location: Toledo
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee(XJ)
Engine: 4.0
Alright did the alignment myself got it toed in at 1/16 still need to adjust the drag link because the wheel is off centered but I'll do that Tuesday when I can lift it up in the air. Boy oh boy does this thing drive great! Steering is responsive and tight, that horrible wandering and darting is completely gone and funny enough it does better in the wind (wind speeds were 20 mph with 40 mph gust today) than my 05 Grand Marquis! This Jeep is really coming together nice! Thank you guys for all the help, couldn't have done it without the information on this website.
Thread
Thread Starter
Forum
Replies
Last Post
nowayitstaysjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
07-01-2014 01:14 AM
Djmostwanted
Modified XJ Cherokee Tech
2
06-21-2013 04:33 PM
ptreaster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
06-12-2013 03:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)