the other day my turn signals and hazards just stopped working in my 98 cherokee classic. went and replaced the flasher relay under dash and checked all of fuses. they still arent working. what else could it be?

 

a short in the system

 

yea, ive heard the 98's are really bad about the electrical problems but i really hope that isnt it. could itbe the switch?

 

make sure your changing the correct flasher. there are 2. one is for the 4way flashers. they are the same. try swapping them out

 

yes it could be

 

as far as i know and have found there is only one. and neither hazards or blinkers work

 

there is 2 check it

 

well where are the 2 located then on a 98. because ive found one of them and its behind dash right behind headlight switch but dont see another one?

 

Do they not work at all or just light up but don't flash?

 

I'm pretty sure there is only one is later models like in my 99, and it is a square type relay flasher unit. There are 2 circular units in my 90.

 

Multifunction switch.

 

I found when I had seamier problem like that a bulb was shorted out running lights.

 

Well you need a test light... and start checking things... like were you are getting power and a ground... the turn sig switch itself could be the problem..im pretty sure everythign runs threw that...but check the fuse box and fuses... they get corodded... just because fuse looks good dont mean its getting power threw it...