I noticed alot of new noises that don't sound very good I just recently got a lift and i haven't gotten it alligned yet just wondering if anyone can let me
Know any possible problems I could face or be facing right now? Appreciate it very much!

 

No big problems. U will put a little more stress on ur steering components and ur tires will start wearing uneven.

 

Need more info on what lift was installed.

 

It was a daystar 3 inch suspension lift it has front coil spacers transfer case drop and rear shackles and new shocks

 

seems like 3 inches will cause driveline issues on some and not on others. i have heard diff arguments on what should be done to steering, breaking, etc. components. some say yes! you NEED a new adj, trac bar, SYE and extended break lines. some say you DONT NEED these things, you just need to relocate the trac bar and break lines... look for threads about adjusting things like "drive shaft angle", or "new noise with lift"... good luck.

 

sounds like, and i could be wrong, that you did the budget boost. i put the 2" version on mine- "pucks" in the front, and drop brackets in the back. this isnt the same as an actual suspension lift. you have only lifted the body, nothing else. (I THINK) so maybe its just ball joints, or something simple. where are noises coming from? front?

 

Yes it's coming from the front and it only
Seems to make
Noise when I steer left or right it just clunks and creeks seems to do it only when under pressure

 

ball joint, tie rod end... mine will do this on a random occasion when i turn it will kinda clunk, or pop. it doesnt do it often, and might have even stopped sisnce i had it serviced last. so it wasnt anything major... hope its simple for you too!

 

Well should I be worried about breaking down?

 

Well hey! I fixed the problem! It was alot of loose bolts that were hooked up to some
Steering components tightened em
All up seemed to do the trick for now if they come loose again I'm gonna lock- tight them thanks again for the help guys