Air Conditioning Fuse?

Subscribe
Feb 6, 2009 | 02:22 PM
  #1  
My air conditioning isn't blowing cold air anymore. The fans are working as well as the heater. But the A/C isn't kicking in. I had pulled the fuse for the climate controls, blower motor/ cooling fan while checking for blown fuses, and put it back in the wrong place. So I put it back in the correct place, and now my fans and heater are working, but no cold air comes out when set to the coldest setting.

Is there another fuse I need to look for? Or could I possibly have busted the A/C compressor when I hit the curb? The body of my car is not damaged, I just had to replace 2 tires. I slid on water going into a turn and couldn't stop in time (probably 10-15 mph).
Reply 0
Feb 6, 2009 | 03:04 PM
  #2  
Go to your local parts store buy a can of R-134 and a jitney to connect to your low side a/c line. Turn on a/c to coldest setting. Attach nozzle shake can and your compressor should kick on. Good luck!!!
Reply 0
Subscribe
Currently Active Users (1)