Aftermarket Steering Wheel
Does ANYONE out there know if there is a way to replace my stock (airbag) steering wheel with an aftermarket wheel? I want to get rid of the airbag altogether, but not sure if there's an install kit that would work on an '01 Cherokee Sport. Any info would be greatly appreciated!
I found something awhile back you just got to back a screw out to disarm the airbag and then you need a puller to get it off. I got to look for it. as far as being illeagal i don't think it is but i don't know local laws vary.
CF Veteran
Joined: Oct 2008
Posts: 2,127
Likes: 2
From: Hell, CA
Year: 1989
Model: Cherokee
Engine: 4.0L I6
Disconnect battery, unscrew horn/air bag, pull out, unplug the connectors. With a Grant wheel you need a kit. You will need to find/ask for a kit for 95 cherokee (or previous as most didnt have airbags). You will also need a steering wheel puller most likely (or you can make one). You will have to trim your clockspring if you still want it to work/use your horn (unless you find which wire the horn goes to the plug that goes into the clockspring) My friend Nick and I installed a grant in his 98 and installed an air horn to use VS the stock one. When you install the new wheel, check your spacing, without the clock spring you will hit your hands on the turn signal switch unless you install a spacer. The directions in the kits are straight forward.
Senior Member
Joined: May 2009
Posts: 559
Likes: 0
From: Middlesex County CT
Year: 1993
Model: Cherokee
Engine: 4.0 H.O
perhaps you could just go to the junkyard and pull the wheel or entire column off an older non-airbag equipped cherokee? I love the wheel on my 93 country its the perfect combination of diameter and spokes.
Trending Topics
im trying to put an aftermarket steering wheel in my 99 2 door. its a six bolt sparco and im trying to figure out which hub adapter will work. i tried researching it but im coming up blank. any help
Senior Member
Joined: Apr 2010
Posts: 720
Likes: 1
From: Marshall, WI
Year: 1994
Model: Cherokee
Engine: 4.0L i6
Originally Posted by samhain
im trying to put an aftermarket steering wheel in my 99 2 door. its a six bolt sparco and im trying to figure out which hub adapter will work. i tried researching it but im coming up blank. any help
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)







