Adding coil spacers to 6.5 inch bds long arm sussy kit
#1
Newbie
Thread Starter
Join Date: Apr 2010
Location: British Columbia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Adding coil spacers to 6.5 inch bds long arm sussy kit
Wondering if i'll need to adjust anything they are 2" poly spacers
http://www.bds-suspension.com/kits/455H
thats my kit i have on my cherokee 6.5 bds
http://www.bds-suspension.com/kits/455H
thats my kit i have on my cherokee 6.5 bds
#3
Newbie
Thread Starter
Join Date: Apr 2010
Location: British Columbia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
my front sags 2 inches lower and im gonna be winching the bumper so itll sag even more. its just to even it out. and what kinda **** is involved in this load wouldnt i just have to adjust the control arms
#4
Junior Member
Join Date: Apr 2010
Location: Oviedo, FL / Campbellsville, KY
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
If your springs are actually sagging, and adding spacers will bring the front back up to 6-7", you should be able to just slap em in and go since (I'm presuming) everything else is already properly set up for 6-7".
#7
CF Veteran
You will also have to do something with your steering too. The tie rod ends will go past their ability to flex at full droop.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)