ABS sensor i did a ohms test and found the driverside sensor was not reading , ive replaced it but the ABS light is still on dash ive drove the jeep a few miles and its still on will the computer have to be reset the brakes seem fine but dont think it will pass its MOT with light showing can anyone give me any info regards RW

 

Hello, I have the same problem. My brakes seem to work fine but my ABS light is on. I need to pass VA safety inspection. Any suggestions? can I just unplug the fuse?

 

Just pull abs relay. Light will go out.

 

It looks like you've fallen victim to the related threads. I'd imagine the OP has resolved or no longer has their Jeep by now.

Just as a side note, for the UK MOT test, if fitted the ABS light must turn on then go out so removing the relay would still cause a failure.

 

Related Threads can be disabled. It has its uses but can get in the way just the same. Many of us disabled it long ago, for multiple reasons. Myself included.

User CP > Control Panel > Settings & Options > Edit Options. Scroll down to Thread Display Options and select Disable Related Threads, and Disable Infinite Scroll. Save changes.