SOLOENT1

My 99 XJ Sport OEMWiring harness has a plug, located in the front header that is for OEM Fog lights.

I realize I need the OEM rocker switch, and the OEM Fuse Link which goes under the hood . Ihave 2 OEM fog lights which I am going to install. I know that there are probably better options for them, but I want to go the OEM route.

My question is what type of "T" plug or connectiondo I need to hook in both Fog Lights to the OEM plug in the wiring harness? Your help is greatly appreciated.

scoobyxj

No, It's for the temp sensor for the trip computer (over head console). If you don't have factory installed foglamps none of the underhood wiring is there. The wiring from the interior plug terminates at C201 (The large connector on the drivers side.)

CCKen

The PDC provisions for the Fog Lamp Relays don't even have the pin sockets for the relays if it didn't come off the assembly line with fog lamps.

SOLOENT1

Mine has a provision for the Fog Lamp Relay and a pin socket, additionally one for running lights.

CCKen

Do the relay docks actually have pin sockets or are they just holes that pin sockets would reside? Try a relay in the docks and see if they actually fit snugley.

What running lights?

SOLOENT1

Thank you for your response. I will pick up a rely and try it.

It has a relaydock for the Fog Lamp Relay and RelayDock marked FOG (drl only).

I was in error when I stated Running Lights.

XJRed96

Just tossing this up... drl= day time running lights

SOLOENT1

Problem Solved: The relay docks DO NOT actually have pinsockets, they just have holes that pin sockets would reside. They DO NOT fit snugly.(Equals NO Fog Light wiring.) That wasthe simplest way for me to verify it, rather than all of the other ways I hadresearched. Thank you very much for yourprofessional advice, and help.