99 NP231 seal question
04-27-2012, 07:42 AM
#1
CF Veteran
Thread Starter
Join Date: Feb 2011
Location: Henderson, NV
Posts: 1,944
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Engine: 4.0L
99 NP231 seal question
So I had to remove the output shaft from my TC today. I reinstalled a new seal and its leaking like crazy. Think plume of smoke.
I did not install the metal sleeve that was in front of the seal. Is this causing the problem? Or would i just have a bad seal?
I did not install the metal sleeve that was in front of the seal. Is this causing the problem? Or would i just have a bad seal?
04-27-2012, 08:51 AM
#2
CF Veteran
Join Date: Jun 2010
Location: Flint/Asheville
Posts: 2,501
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
I was told to replace the bushing and seal at same time, the bushing takes the slop/deflection out of the shaft allowing the seal to do its job. I have both but havent changed them yet.
Thread
Thread Starter
Forum
Replies
Last Post
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
weswins
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-14-2015 10:09 AM
HappyTrails
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-11-2015 10:05 PM
canada_man
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-04-2015 11:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
