'99 Cherokee Sway Bar Bushings..
#2
"CF Moderator"
Join Date: Sep 2008
Location: N.J. Shore Area
Posts: 3,045
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: l6 HO
I was gonna order the kit from http://www.quadratec.com but I was going to get the whole front end kit for $69...Tj
#7
I don't know if you are talking about the sway bar bushings or the sway bar link bushings so i'll include everything i did.
I replaced mine with all Moog parts purchased @ O'rileys. They also sell their brand of sway bar stuff called Master Pro, it's actually re-boxed MOOG!
1" or 26mm Sway bar bushings - $12
Sway bar links( master Pro) -$13 a link
Like previously said, measure your sway bar! I took a adjustable monkey wrench and tightened it until I could just get it off, then measured the opening of the wrench. Mine was exactly 1" or 26mm
I replaced mine with all Moog parts purchased @ O'rileys. They also sell their brand of sway bar stuff called Master Pro, it's actually re-boxed MOOG!
1" or 26mm Sway bar bushings - $12
Sway bar links( master Pro) -$13 a link
Like previously said, measure your sway bar! I took a adjustable monkey wrench and tightened it until I could just get it off, then measured the opening of the wrench. Mine was exactly 1" or 26mm
Last edited by 97xjcountry; 06-03-2009 at 06:35 PM.
Trending Topics
#8
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Yeah I didn't know that till I went to buy them and they asked me which size..I was like umm ok...Went and measured them and I think mine was the 28mm model.
#10
Junior Member
Join Date: May 2009
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L`
When I lifted my 90 XJ I went to the JY and found a 28mm bar. The thicker bar with Daystar poly bushings really tighten up the turn-in.
It's a dirt cheap upgrade.
It's a dirt cheap upgrade.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)