Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

99 4.0 Head question

Old 04-30-2018, 08:56 AM
  #1  
Newbie
Thread Starter
 
The Badness's Avatar
 
Join Date: Jan 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default 99 4.0 Head question

1999 xj classic 4.0 4wd aw4.

Bought a short block to throw in my 99 and swap my 99s head over to. I was told it was a 99 block, noticed obd1 connectors...unless it was a 99 engine thrown into a OBD1 jeep, its not a 99. Soooo I havent found the actual year of the block (currently at work) but i need to know what year short blocks my 99 head will mate up to without issue, connections or accessories aside, im talking about physical compatibility to the shortblock. If someone has a link providing full compatibility info, that would be stellar
Old 04-30-2018, 08:26 PM
  #2  
CF Veteran
 
97grand4.0's Avatar
 
Join Date: Nov 2015
Location: syracuse ny
Posts: 2,764
Received 170 Likes on 158 Posts
Year: 1997
Model: Grand Cherokee (ZJ)
Engine: 4.0, new lifters valve job with new springs and exhaust valves, preload set with shims
Default

Welcome to the forum. Good luck tossing those engines around.
Old 05-01-2018, 09:46 PM
  #3  
CF Veteran
 
BlueRidgeMark's Avatar
 
Join Date: May 2012
Location: Lost in the wilds of Virginia
Posts: 7,964
Received 951 Likes on 767 Posts
Year: 1998 Classic (I'll get it running soon....) and 02 Grand
Model: Cherokee (XJ)
Engine: 4.0
Default

There's an engine swap sticky at the top of the forum. Might have your answers.
The following users liked this post:
Sean Tucker (03-24-2021)
Old 05-01-2018, 10:27 PM
  #4  
Junior Member
 
jernigan's Avatar
 
Join Date: Oct 2017
Location: Arkansas
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Default

I have a 99 cherokee sport with the 4.0. I put a 93 4.0 short block in it last october. I reused the head off my 99 which was a 0630 casting number. Use the fly wheel off of your old motor because the crank sensor for the older ones is different. The 93 block didnt have alignment studs for the head so it makes the head gasket install a little harder but it will work. I have put about 8,000 miles on it, no problems. Also use your old distributor, and while your in there replace your rear main seal and oil pump those parts are really cheap at rockauto.
Old 05-02-2018, 12:09 AM
  #5  
CF Veteran
 
RocketMouse's Avatar
 
Join Date: Nov 2017
Location: Southern Texas (former AZ & Aus)
Posts: 2,415
Received 249 Likes on 199 Posts
Year: 1999
Model: Cherokee(XJ)
Engine: I6 4.0L
Default

Originally Posted by BlueRidgeMark
There's an engine swap sticky at the top of the forum. Might have your answers.
^^^ X2
Old 05-05-2018, 03:16 PM
  #6  
Newbie
Thread Starter
 
The Badness's Avatar
 
Join Date: Jan 2012
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Model: Cherokee
Default

Right on. Just found out the short block is a 92. So use my fly wheel and distributor. Obviously swap over all the obd2 stuff too. Sweet thanks everyone
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NitroGoat
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
07-05-2021 02:17 PM
worklist
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
11-23-2017 08:15 AM
541_halseth
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
12-16-2010 07:53 PM
01cherokeesprt
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
07-21-2010 12:55 AM
jeepgeek2002
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
12-10-2009 05:31 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread
Quick Reply: 99 4.0 Head question



All times are GMT -5. The time now is 08:51 AM.