Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

98 Cherokee vibration problems

Thread Tools
 
Search this Thread
 
Old Nov 25, 2010 | 08:55 PM
  #16  
98jeepcher's Avatar
Thread Starter
Seasoned Member
 
Joined: Dec 2009
Posts: 391
Likes: 0
From: LaGrange, Ky
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Default

Originally Posted by alloutperform
my customer is a young kid and didn't get the concept that if the transfer case is leaking it will run out of fluid..the vibe started about a week ago felt just like a bad joint...there is a ton of slop in the chain inside the case and i wouldn't be surprised if it needs bearings...aka whipped t-case
Cool thanks for the info. I will check it out when its on the rack.
Reply
Old Nov 26, 2010 | 09:31 AM
  #17  
tjwalker's Avatar
CF Veteran
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2010
Posts: 5,841
Likes: 117
From: In the middle of Minnesota!
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Vibes can be tough to isolate.

I do agree with the others though that recommend you removing the front drive shaft and
test driving it to see if that makes a difference.
Reply
Old Nov 27, 2010 | 09:36 AM
  #18  
98jeepcher's Avatar
Thread Starter
Seasoned Member
 
Joined: Dec 2009
Posts: 391
Likes: 0
From: LaGrange, Ky
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Default

Originally Posted by tjwalker
Vibes can be tough to isolate.

I do agree with the others though that recommend you removing the front drive shaft and
test driving it to see if that makes a difference.
Okay will do Thanks man.
Reply
Old Nov 27, 2010 | 09:39 AM
  #19  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

Originally Posted by tjwalker
Vibes can be tough to isolate.

I do agree with the others though that recommend you removing the front drive shaft and
test driving it to see if that makes a difference.
you now unless you have all kinds of extra money you just want to give to a mechanic if so ill take some lol
Reply
Old Nov 27, 2010 | 07:59 PM
  #20  
98jeepcher's Avatar
Thread Starter
Seasoned Member
 
Joined: Dec 2009
Posts: 391
Likes: 0
From: LaGrange, Ky
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Default

Originally Posted by freegdr
you now unless you have all kinds of extra money you just want to give to a mechanic if so ill take some lol
X2 ^ but i may have found the problem my axle joints are shot the father in law says. They checked them when it was on the lift, ill keep you all informed. I am going to tackle this problem tomorrow and test drive it. Thanks guys
Reply
Old Nov 28, 2010 | 04:06 PM
  #21  
98jeepcher's Avatar
Thread Starter
Seasoned Member
 
Joined: Dec 2009
Posts: 391
Likes: 0
From: LaGrange, Ky
Year: 1998
Model: Cherokee
Engine: 4.0l inline 6, bored tb.
Default

Awesome replaced the axle joint, didnt quite get rid of my vibe but i think i may go ahead and change the other side next week or so. Thanks everyone for all your help and info
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
Jan 8, 2025 11:36 PM
LiamLikeNeeson
Jeep Builds
18
Jan 1, 2024 02:25 AM
studmuffin
Cherokee Chat
16
Sep 16, 2015 07:52 PM
Ashs1714
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 4, 2015 10:14 PM
ROCKRIDGE 4WD
Vendor Showcase
0
Aug 25, 2015 06:49 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 01:36 AM.