96 and older cherokee cup holder
CF Veteran
Joined: Jul 2009
Posts: 2,471
Likes: 2
I got all kinds of cupholders in my XJ 
. I am always checking out other cars in the boneyard to see what will fit.
If you look closely on the right you'll see the "style B" that I found in the junkyard. It's not bolted on, has never fallen off and works great since I rarely carry a passenger. Stays put even when I do, because I warn them
. I had "style A" but got rid of it because of the e-brake. Jersey inspection is a pain 
. It was useless anyway, holes were too small.
Driver side window. No, it does not interfere with driving, and I'm left handed. My cell phone clips in the smaller pocket. Just have to make sure the drink container is sealed when I'm climbing rocks ... I use a "coozie" and all sized of cups fit fine. Cons: I have to remove it temporarily to open/close the wing window ... which I need only when I'm stuck in traffic in Philly . (I hate that city)
In the rear: came with the Husky center console insert. Better for the occasional passenger than for me, of course, but it can serve as "storage" until you get ready for your drink. Cons: Must be removed to fold the bench seat forward, so I see a short life for it there. Gonna try to see if it can be mounted anywhere else. It's steel.
. I am always checking out other cars in the boneyard to see what will fit.If you look closely on the right you'll see the "style B" that I found in the junkyard. It's not bolted on, has never fallen off and works great since I rarely carry a passenger. Stays put even when I do, because I warn them
. I had "style A" but got rid of it because of the e-brake. Jersey inspection is a pain . It was useless anyway, holes were too small.Driver side window. No, it does not interfere with driving, and I'm left handed. My cell phone clips in the smaller pocket. Just have to make sure the drink container is sealed when I'm climbing rocks ... I use a "coozie" and all sized of cups fit fine. Cons: I have to remove it temporarily to open/close the wing window ... which I need only when I'm stuck in traffic in Philly
. (I hate that city)In the rear: came with the Husky center console insert. Better for the occasional passenger than for me, of course, but it can serve as "storage" until you get ready for your drink. Cons: Must be removed to fold the bench seat forward, so I see a short life for it there. Gonna try to see if it can be mounted anywhere else. It's steel.
Senior Member
Joined: May 2009
Posts: 728
Likes: 1
From: gig harbor, washington
Year: 1995
Model: Cherokee
Engine: 4.0 L
CF Veteran
Joined: Mar 2009
Posts: 1,988
Likes: 3
From: USA
Year: 1999
Engine: l6 4.0, K&N FIPK & 62mm bored TB
Renix Super Guru
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Newbie
Joined: Mar 2010
Posts: 1
Likes: 0
From: Charleston
Year: 1986
Model: Wagoneer
im looking at style A because my ebrake doesnt work anyways. but i do plan on getting that fixed. does it not allow it to go all the way up or does it get in the way of you grabbing and pulling it?
style B just looks tacky and easily broken.
style B just looks tacky and easily broken.
CF Veteran
Joined: Aug 2008
Posts: 6,588
Likes: 495
From: Chico, CA
Year: 1986
Model: Cherokee
Engine: 4.3L with headers and full 3" exhaust system
I had style A and did not like loosing my parking brake with a 5 speed at the time. So I adapted it to style B by trimming the bottom a little and using some self tapping drill screws in the top.
In my 86 Laredo, there are built in cup holders in the panels for the back seat.
In my 86 Laredo, there are built in cup holders in the panels for the back seat.
CF Veteran
Joined: Jan 2009
Posts: 1,964
Likes: 6
From: Baltimore, Maryland
Year: 1994 1993
Model: Cherokee
Engine: 4.0
Seasoned Member
Joined: Sep 2011
Posts: 278
Likes: 0
From: Oregon
Year: 1990
Model: Cherokee
Engine: Inline Six
I had style A and did not like loosing my parking brake with a 5 speed at the time. So I adapted it to style B by trimming the bottom a little and using some self tapping drill screws in the top.
In my 86 Laredo, there are built in cup holders in the panels for the back seat.
In my 86 Laredo, there are built in cup holders in the panels for the back seat.
Hey quick question, what are all the sticks for? Im confused to why you have all those.
Junior Member
Joined: Jul 2012
Posts: 61
Likes: 0
From: Stuart, FL
Year: 1993
Model: Cherokee
Engine: 4.0L I6
