vinny99cherokee

I just picked up a 96 cherokee not running. Thought it needed the typical crank sensor. Anyway crank sensor was not the issue. At first I wasnt getting any fuel or spark and im not able to get into the computer with a scanner. I did find a connector that was badly corroded and repair that. Since I did that I got the fuel pump back on. Now im still not getting spark and I still cant connect to the computer. I have checked fuses they are all good. I tried a new, well reman computer. It has a new crank sensor. It had a remote start I took that out. And another thing is the electric fan turns on with the key. Previous owner said he parked it and went to start a few weeks later and it did not start.

Flatfender

Did the reman ecm communicate? What scan tool?
Basics...grounds voltage. resistance you have a dmm? Don't go buyin a bunch of parts until you do basic checks
Does it crank?

vinny99cherokee

I figured it out. Turned out to be a bad wire to the pcm. Repaired the wire and fired right up.

hairyhawkins

HI whot wire wos it ? my 96 is doing exactly the same .HELP

vinny99cherokee

It was the harness coming out if the fuse box. The power wire for the pcm it was a red solid wire going into the 30amp fuse. Also there was connection under the air box that was really nasty

hairyhawkins

HI thanks for reply mine wos the generator.after it fired up fan stoped and works as should .