i drove my jeep to work without any issues when i tried to leave that afternoon it started ran for a minute then died has not fired since.

changed the crank sensor i have fuel to the rail and i have fire at no 1 plug

HELP please !
thanks

aaron

 

Have you checked to make sure it is time,put it at tdc and make sure,it is possible the chain has slipped. Having spark at #1 does not mean it is arriving at the proper time.

 

timing seems to be ok

i changed the cam sensor and still no luck but i think i found the problems
the injectors are not spraying fuel

anyone ideas on what may be causing this ?
thanks
aaron

 

Is your fuel pump working?turn on your key and see if you can hear it,If is coming on make sure you have pressure at the rail,if you do it will be either a sensor or ecu.

 

remove fuel line and turn key on and i have a huge amount of gas coming out of the hose so i guess the pump is working like it should
i have no way of checking the pessure

thanks
aaron

 

get a fuel pressure gauge and do it the right and safe way they have them harbor freight for like $20